DIY Casting Movement

Metal Casting

People who like to make their own artifacts and are enchanted with the idea of building new and useful things from scratch are sure to enjoy ‘do it yourself casting’ that can be done at home using simple methods and techniques. There are a lot of unique things that one can create with their very own home made DIY Metal Foundry. A good understanding of some basic foundry knowledge and few simple tools can help you make metal casting at home possible. Many people find it difficult to get special parts for their cars or bikes or even find it very costly to modify their cars, house or even bikes. If you develop your hobby of Metal Casting , then you can easily make special parts for your cars and bikes and also will find it easy and save a lot of money. Casting can be used to make many things like, simple ornaments knobs and even handles. Hand wheels and small machinery or tools can also be made. Small articles like brass name plates, statues, vintage motorcycle and car parts, etc can also be made at home.

Furnace Designs that can be made at home:

Coffee Can Metal Casting : This is very easy to build and even a large coffee-can will serve the purpose. These materials can be used to build a very simple and non complex gas fired furnace.

The “2 bucks” furnace: Is not as the name suggests, the furnace can’t be built in two bucks.This is really a two bucket design that we are referring to. It is very useful and a good experienced person can build it with a budget that is below 10 bucks. What you are getting here is that it effectively burns propane which is a plus.

Flowerpot crucible furnace: This furnace can also be built very easily and most importantly, it can be built using the waste material from your back yard. All you need is an old flower pot and a few metal cans. Melt the metal cans and coat the inside of the flower pot with the melted metal and you furnace is ready.

There are plenty of other types of furnaces that can be build at home and some of these are chimney pipe furnaces and brick furnaces.

Tools and material needed:

Home made Aluminum pulleys: Pulleys of different size and shapes can be made by bending aluminum rods or plates. Usually this process becomes fairly fun after you do a few and realize how simple and easy it can be.

Building steel crucibles: Steel crucibles are a bit difficult to make. You need to cut the steel and weld it using a welder, so it is a bit risky job and can cause injuries. It needs to be done with utmost care and precaution.

Home made ladle: A ladle can be made at home using a small portion of a steel water pipe; you can select the water pipe according to your needs and then cut it in the desired dimensions to create your home made ladle.

After doing all this basic work and gathering all the required information, you can now start your own Metal Casting and make desired articles. One other thing that needs to be done is to make the molds for the shapes and sizes that you want to make and then you are done. All types of metals and alloys can be used and melted for home casting, only their degree of heat required varies.

Metal Casting ZOne is a new community website all about Home and DIY Metal Casting. Come by today and join the site for free and you get a free Metal Casting Basics EBook just for signing up! Come by MetalCastingZone.Com Today for your free Ebook on Metal Casting.

Information on Cupola Casting

Metal Casting

A Cupola is a type of furnace that is very much alike to blast furnace. The Cupola furnace is refractory lined, stack of steel that is around 20 to 35 feet high. It rests on a base plate that is made of cast iron and has four legs. The casting that is obtained from the cupola furnace is known as a cupola casting.

Cupola Furnace: The Cupola Metal Casting furnace is one of the oldest forms of furnace that have been used by the iron and metal foundries. The Cupola furnace is the crudest and the simplest furnace that has been used by the industries. However, the cupola’s use is declining and the furnace is fast being extinct.

Merits of the Cupola Metal Casting Furnace: Though the electric or the blast furnace has started replacing the Cupola Furnace, it has some special benefits of its own. The Cupola furnace is very nice in the fact that its set up so it can remain always in action and working order. The furnace also offers a very high melting rate. The most important merit of the furnace is that it has relatively very low melting cost. The furnace has also permits a lot of ease of operation.

However, due to the invention and development of the electric furnace, the use of Cupola furnaces has substantially declined. The electric furnace melts a much larger amount of metal. The operation cost of the electric furnace is also very low. The electric furnace also emits a much smaller level of smoke heat and also pollutants.

Construction of the Cupola furnace: The Cupola furnace is constructed in a crude and simple manner. The Cupola Metal Casting furnace is a vertical structure like a steel shell. The steel is lined with refractory bricks from the inside. The furnace has an opening half way in the vertical shaft. The charge is introduced through the opening. The charge is divided into different layers. This is the place where the metal is contained that is inline to be melted. The metal is mixed with coke, fuel, and lime stone flux. The fuel is burnt directly into the air and is introduced in to the furnace through the tuyeres which are positioned above the hearth. The hot gases that have been produced ascend and pre heat the charge.

The cupolas in majority of the cases have drop down doors. The bottoms can be dropped down to facilitate the cleaning and the repairs. At bottom in front of the furnace is a tap hole. The molten metal is removed from the tap hole. At the rear there is also another slag hole. A fume arrester or what is known as a spark is on top of the stag.

Usually the cupola has a diameter of 405 to 2000 mm. It is operated on varying fuels for different metal ratios. The molten metal that can be produced in the copula of this size at a speed of 1 to 30 tones per hour.

Its once the process of melting has finished when the charging is halted and this is called continuity of process. However, the blast of hot air is always maintained till all the metal has been melted and has been taken out from the tap hole. When the air cools down, the doors at the bottom are opened and the residue that has been left behind is removed.           

Metal Casting ZOne is a new community website all about Home and DIY Metal Casting. Come by today and join the site for free and you get a free Metal Casting Basics EBook just for signing up! Come by MetalCastingZone.Com Today for your free Ebook on Metal Casting.

Learn about Resin Casting and the process of Resin Casting

Metal Casting

Technical Installation is the process that is used to preform Resin Casting. The process of Resin Casting is a complex process that is used in a variety of fields. What is neat about resin casting is that it gives a higher quality and precise look to the product that is casted.

Need for Resin Metal Casting : Resin casting is used to obtain a high level of quality and also precision in the dimensions of the product. Resin casting is basically used in the process of miniaturization i.e. the process of making things small. The process of Resin Casting is also used extensively the field of electronics. The electronics industries today resort to the resin castings to achieve the norms of total quality management.

The process of resin metal casting earned success and also gained popularity in the field of electronics because it facilitated the acute miniaturization process and also at the same time maintained a high level of quality. The electronics industry is a very demanding field in terms of quality and cost. Experts recommend that the process of resin casting is an ideal way to achieve the required quality and it also helps cut down the cost of production. The process is also highly productive and also reliable with respect to speed.          

Industrial Applications of Resin Casting: The process of resin casting is basically used in the electronics industry. Resin Casting is used in the production of transformers, Liquid Crystals Displays more commonly known as the LCD’s. It also used in the manufacture of heavy electronic systems.

Important steps in Resin Metal Casting : The process of resin casting is completed in basically five important steps. The first step is to condition the resin, and then the material is transported. After the transportation of the material the three most important steps are executed. First the material is metered, then the material is mixed and then finally it is dispensed.

Conditioning process: The process of conditioning in the resin casting evenly distributes the fillers ion the mixture. The conditioning also eliminates the moisture and air. It also makes the mixture constant, and also elevates the temperature of the mixture. The process of conditioning also maintains a low viscosity in the mixture. This process is very important for complex combinations as it intensifies the quality of the product.

Process of Material Transportation: In the process of transportation of the materials, the piston pumps, screw pumps, and the gear pumps are used. For the highly viscous substances, instead of gear pumps, follower plate pumps are used.

Mixing process: The process of mixing is extremely important as it obtains an equal and stabilized reaction through all the materials. The most commonly used methods in the mixing are the static mixing tube, the dynamic blender, and the dynamic static mixing tube.

Dispensing process: The process of dispensing is the most important process in the Resin Metal Casting . While the dispensing process takes place, the dispensing unit and the movement of the part are relative to one another.

Metering Systems and sometimes a vacuum system is what is used to cast Resin. In the industrial to cut costs and also time multiple dispensing units are used.          

Metal Casting ZOne is a new community website all about Home and DIY Metal Casting. Come by today and join the site for free and you get a free Metal Casting Basics EBook just for signing up! Come by MetalCastingZone.Com Today for your free Ebook on Metal Casting.

The Definition of Various Metal Casting Tools

Metal Casting

There are various types of Metal Casting tools. Provided below are details of some of the casting tools.

Esmarch plaster scissors: These are German stainless steel cast scissors of high quality. The entire length is 20 centimeters or 8 inches. There is a 6 centimeters slanted blade for safety of the patient. The handle for leverage is of 15 centimeters. This is perfect to cut the inner layers of synthetic cast materials or plaster.

Lister bandage scissors: These are stainless steel bandage scissors of high quality. The size of the blade is 5.5 centimeters. It resists rust and corrosion. This scissors are perfect to remove QuickCast splints and casts.

Cast scissors for serial finger casts: These are manufactured from German stainless steel of highest quality. The total Length comes out to be exactly Nine Centimeters. There is a 1.3 centimeters slant design on the cutting surface. During cast removal, there is good patient safety and the scissors offer excellent force.

Casting spreader: This has a stainless steel construction. There is a spring loaded handle to facilitate use.

Casting breaker: The length of the cast breaker is seven inches. This is an O.R. quality German instrument. This is used for lightweight cast breaking and trimming. This has deep serrated tips and is free of latex. The cast breaker is available in sizes of 9.5 inches also.

Plaster and Utility shears: The length of this instrument is 8 inches. This is a German instrument of O.R. quality. There is a spring loaded handle design that decreases the hand fatigue. This is very efficient in case of cotton or cloth wadding. It is free of latex.

Wire suture scissors: This is a stainless steel scissors of high quality. This is a perfect device to remove finger serial casts and to make tight corner cuts.

Fiskars all purpose snips: This instrument has a positive safety latch, a stainless steel spring and a comfort grip. The design is such that there is maximum power and handling ease. The stainless steel blades of high quality are used to cut a wide range of materials. Low temperature thermoplastics can be cut at room temperature by this device.

Aviation snips: These snips are of industry quality. Non-heated splinting material can be cut with efficiency. It can be used to cut straight lines as well as wide curves. The handles are coated with plastic to increase the comfort. What is nice is that no matter if you are right handed or left handed, the device can be used in either.

Softouch spring action scissors: Those who have weak hands can also operate these by employing half the effort. There is a gray cushion grip. This is used to provide relief to the finger and thumb discomfort. It also absorbs squeezing pressure. The handle can be easily gripped and used in the left hand or right hand. There is a gentle spring action to open blades at the end of each cut. This offers relief to the hand and joints. There is a large slide lock for single handed operation. This also maintains the blades closed for portability and safe storage. It is free of latex.

Cast stand: The height can be adjusted. This comprises of a drip bucket. While the limb is being casted, it provides support to the arm or leg of the patient.

Metal Casting ZOne is a new community website all about Home and DIY Metal Casting. Come by today and join the site for free and you get a free Metal Casting Basics EBook just for signing up! Stop Around MetalCastingZone.Com Today for your free Ebook on Metal Casting.

Spin Casting, Sand Casting and What is Metal Casting

Metal Casting

There are various casting processes being implemented now days. The oldest amongst them is sand casting. Sand Casting is also widely used. They can be described as follows:

Sand Casting: Sand Casting involves formation of mold from a mixture of sand and to pour a casting liquid, most probably, a molten metal into mold. Then, you wait a while and let the metal harden up so then you can remove the mold. Sand molding consists of two types: green sand method and air set method. The first one consists of mixture of clay, moisture, silica, and many other additives. The second one consists of mixture of dry sand and other materials, not moist clay. They are mixed with the help of a quick curing adhesive. When all of these materials are used together, it is a process called air set.

At times, there is temporary plug placed to pour the fluid which is to be molded. Air-set molds usually form molds consisting of two parts-the bottom and the top. The mixture of sand gets tamped down after its addition. It does not generate any by-product. After the solidification and cooling of metal, the mold gets usually destroyed. This is because its removal involves a lot of breaking and cracking. The casting accuracy depends a great deal on the sand and the process of molding used. Castings composed of green sand result into formation of rough texture on casting surface, and this characteristic makes them easily recognizable. In reality, studies show that molds that are air-set produce the smoothest castings.

Many a times, the casting process results in losing of components of sand mixture. It is possible to reuse green sand by the way of adjusting the composition to get the lost additives and moisture replenished. The entire pattern itself is eligible to be reused for producing novel sand molds. The method of reuse can be continued for an indefinite period. In 1950, casting process got automated partially. They have been in great demand for developing production lines since then. 

Spin Casting: Sand Casting is better known as Centrifugal Rubber Mold Casting (CRMC). It implies utilization of centrifugal force for producing castings out of rubber mold. As a customary practice, a mold having shape of a disc gets spun through its ‘central axis’ at a pre-decided speed. The material used for casting is usually thermoset plastic in the liquid form or a molten metal. It gets poured into the mold through the opening at its centre. Corresponding to the solidification of metal, or the setting of thermoset plastic, the spinning of the filled mold takes place.

Normally, organic rubber or vulcanized silicone is used as a mold-making substrate in spin casting. Vulcanization takes place in the middle of process of mold-making. After the successful completion of vulcanization process, venting and gating must be undergone by the mold. This implies carving of channels for ensuring proper material flow and air during the course of casting. Your best bet for preforming the proccessed is to either use a scalpel or knife. The mold complexity is directly proportional to the time required in implementation of venting and gating.  

This website called Metal Casting Zone is a community place to come and discuss and learn everything about Metal Casting. Come by today and join the site for free and you get a free Metal Casting Basics EBook just for signing up! Come by MetalCastingZone.Com Today for your free Ebook on Metal Casting.

Casting Sand, Green Sand, and Metal Casting Information

Metal Casting

Green Sand: Green sand is also called as foundry sand or molding sand. This is utilized for sand Metal Casting . When this sand is oiled or moistened, it has a tendency to pack well and retain the shape. Green sand is a mix of pulverized coal, water, bentonite clay and sand. Out of these four components, the biggest part is that of the sand.  There are several proportions of these four components. The different ratios are used to adjust the surface finish, moldability and capacity of the hot molten metal to degas. The prime use of this sand is in the Metal Casting . The coal is usually called as sea coal in foundries. Sea Coal and the amount of Sea Coal is less than five percent. It undergoes partial combustion when there is molten metal present and this causes offgassing of organic vapors.

Green sand is stored in flasks (as the casters call the container). What these boxes are are boxes that don't have a bottom or lit to them. This box is divided into two half parts and these are connected together. These halves are called as the top or cope and bottom or drag flask.

As per its name, green sand is not green in color. The word “green” is used as it is used in the wet state.

Casting Sand: Some Casting sands are oil bonded and foundry mix sand. This is a mixing of oil, resin and sharp fine silica sand. Such a mix can be utilized in sand casting of all varieties of metals. Some casting sands consist of 20 percent more oil and resin as compared to other brands. The objective is to ascertain the best mix for maximum green power and the best finish for the surface, that is possible.

A good sand to use for casting sand is an oil bonded sand and can be used as a substitute for water bonded green sand. The advantage over traditional, older sands is that as water is absent, the sand does not steam like the traditional sands. This sand is more secure to use than green sand. The reason is that potentially explosive quantities of steam are not generated. Due to this dearth of steam generation and the smooth texture of the sand, the oil bonded sand results in a smoother surface finish. The novice can use these sands and get professional results.

Use of casting sand: The same techniques, patterns and tools that are used for water bonded sands can be used for oil bonded casting sands. As the sand has better adhesive properties, there are fewer hassles with loose sand in the impression. The difference is that water cannot be used to manage loose sections. However, as the self adhesion is better, there are fewer problems of crumbling.

When the oil comes in contact with molten metal, it does not burn. When the castings are being shaken out, it is advisable to take off the sand that is burned. This sand that is burned can then be mixed again in the pile of fresh sand. It reabsorbs oil and works very well. After repeated use of this sand, the oil gets depleted. In this case, around 30W of non-detergent motor oil can be used to reload the sand with oil.

Metal Casting Zone is a new community website all about Home and DIY Metal Casting. Come by today and join the site for free and you get a free Metal Casting Basics EBook just for signing up! Come by MetalCastingZone.Com Today for your free Ebook on Metal Casting.

Metal Casting Supplies and Information on Metal Casting

Metal Casting

Some of the Metal Casting supplies are described below.

Cast cutters and blades: There are two varieties of cast cutter blade for plaster casts – 2 inches and 2.5 inches. This comprises of one blade and in most of the cutters, stainless steel blades fit in. This has a maintenance free operation and is comfortable to use. There is a high torque motor and an ON / OFF switch. The Cast cutter blade for synthetic casts is also available in two sizes – 2 inches and 2.5 inches. This has the same features as mentioned above. The Hercules Plaster Shears 7.5 inches is a Hercules heavy duty bandage and plaster shears 7.5 inches (19.1 cm) and has a serrated blade. The Cast cutter heavy duty with metal housing consists of one 2 inches fiberglass blade. In most of the cutters, a stainless steel blade can be fitted. The length is 12.5 inches and weight is 3 lbs 13 oz. This is specially lubricated for greater service and more comfort. The heavy duty can be used in both clinical use and fabrication setting.

Cast padding: The specialist Metal Casting padding 3 inches X 4 yards is made up of micro pleated cotton fabric that stretches more than 50 percent. There is no need to tear and tuck for a smooth and comfortable fit. This is also available in sizes of 4 inches X 4 yards as well as 2 inches X 4 yards. The Sof Rol padding 3 inches X 4 yards is made of 100 percent surgical grade rayon. This is also available in sizes of 2 inches and 4 inches X 4 yards.

Metal Casting splinting materials: The orthoplast II splint material plain is available in size of 18 inches X 24 inches X 1/8 inch. The setting time is 3 to 4 minutes. The finished splints can be butt bonded, hinged, bonded, strapped and riveted. There is a wax coated surface. This is self adhering when heated. This is majorly designed for upper extremities. What it is really perfect for are hand splints. It moulds as per the contours of the body without any wrinkling. The orthoplast splinting material plain is available in sizes of 18 inches X 24 inches X 1/8 inch. This is made of a low heat thermo plastic material and is highly comfortable. After this material is heated, it can be molded or cut to any shape and adheres to itself. This material can be butt bonded, hinged, bonded, strapped and riveted. Cylindrical Casting Procedures can also be used with this.

Heat gun: This is of two types – heat gun and master heat gun 220 volt.

Splinting pans: The forma splint 14 inches X 10 inches is an extremely compact and lightweight design. So, it is perfect for small splinting needs or for varying spots. This has a stainless steel working tank of dimensions 13 inches X 9.5 inches X 1.25 inches. This has a lexan cover. Its important to have a good working thermostat so it can maintain the water temperature between 150 and 190 degrees Farenheit. There is a high heat safety switch and grounded hospital grade plug. The empty weight of this device is 5.5 lbs. The Required Temperature is reached in only around 15 seconds.

Metal Casting ZOne is a new community website all about Home and DIY Metal Casting. Come by today and join the site for free and you get a free Metal Casting Basics EBook just for signing up! Come by MetalCastingZone.Com Today for your free Ebook on Metal Casting.